29 Jul

STAINLESS STEEL EXTERIOR DOOR PORTHOLES 350 mm (13,78”)

EXTERIOR DOOR PORTHOLES – amazing windows fitted to outside doors. For security reasons use carriage bolts on the exterior side of these portholes for them not to be unscrewed. For adequate insulation on exterior doors, the portholes are fitted with insulation glass. Additionally, the glass used in these portholes possesses strong burglar-proofing qualities. Mounting the porthole to an appropriate door thickness is achieved by fitting the matching insulation glass.Attention! When ordering, please write the thickness of the door in which the porthole will be installed. This is information necessary to complete the order! The offered set includes: – Ring pressed from stainless steel with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: A flange nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

FLAT PORTHOLE FOR DOORS STAINLESS STEEL 230 mm

PORTHOLE FOR DOORS STAINLESS STEEL diameter 230 mm – flat door thickness 10-100 mm. PORTHOLE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 230 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 10-100 mm (The standard porthole is adapted to the door thickness of 40mm). The rings are made of stainless steel INOX, while the glass is made according to the order. The offered set includes: – Ring from stainless steel with holes – 2 pieces, – Glass according to order – 2 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

PORTHOLE BULL’S EYE FOR DOORS phi 350 mm Reinforced glass

BULL’S EYE FOR DOORS phi 350 mm Reinforced glass A BULL’S EYE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (other door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of polished stainless steel, while the glass is made according to the order ( reinforced glass). Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

PORTHOLE FOR DOORS STAINED GLASS No. 6 phi 350 mm

PORTHOLE FOR DOORS STAINED GLASS No. 6 phi 350 mm A BULL’S EYE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (larger door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of stainless steel painted the color of “old gold”. The glass is stained glass No 6. ( Tiffani technique) visible in the photo. Rings can also be unpainted. Attention! When ordering, please write the thickness of the door in which the porthole will be installed. This is information necessary to complete the order! The offered set includes: – Ring pressed from stainless steel (painted the color of “old gold”) with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A flange nut a coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

PORTHOLE FOR DOOR STAINLESS STEEL 230 mm flat

PORTHOLE FOR DOORS STAINLESS STEEL phi 230 mm – flat door thickness 10-100 mm. PORTHOLE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 230 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 10-100 mm . The rings are made of stainless steel INOX, while the glass is made according to the order. The offered set includes: – Ring from stainless steel with holes – 2 pieces, – Glass according to order – 2 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

BULL’S EYE FOR DOORS phi 350 mm WONDERFUL PORTHOLE

BULL’S EYE FOR DOORS phi 350 mm. A BULL’S EYE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (other door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of polished stainless steel, while the glass is made according to the order (to choose from frosted, transparent, secure VSG, armored, WC or stained glass). The rings may be powder painted into any color. The offered set includes: – Ring pressed from stainless steel (possibly powder coated to a RAL color) with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A flange nut a coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

BULL’S EYE PORTHOLE FOR DOOR 350 mm

BULL’S EYE PORTHOLE FOR DOOR diameter 350 mm. A BULL’S EYE FOR DOOR, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (other door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of polished stainless steel, while the glass is made according to the order (to choose from frosted, transparent, secure VSG, armored, WC or stained glass). The rings may be powder painted into any color. The offered set includes: – Ring pressed from stainless steel (possibly powder coated to a RAL color) with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A flange nut a coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

BULL’S EYE FOR DOORS phi 350 mm. New.

BULL’S EYE FOR DOORS phi 350 mm. A BULL’S EYE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (larger door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of polished stainless steel, while the glass is made according to the order (to choose from frosted, transparent, secure VSG, armored, WC or stained glass). The rings may be powder painted into any color. The offered set includes: – Ring pressed from stainless steel (possibly powder coated to a RAL color) with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A flange nut a coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

PORTHOLE BULL’S EYE FOR DOORS phi 350 mm

BULL’S EYE FOR DOORS phi 350 mm. A BULL’S EYE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (other door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of polished stainless steel, while the glass is made according to the order (to choose from frosted, transparent, secure VSG, armored, WC or stained glass). The rings may be powder painted into any color. The offered set includes: – Ring pressed from stainless steel (possibly powder coated to a RAL color) with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A flange nut a coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading

29 Jul

PORTHOLE BULL’S EYE FOR DOORS phi 350 mm

BULL’S EYE FOR DOORS phi 350 mm A BULL’S EYE FOR DOORS, which is in our offer, is a wonderful porthole with a diameter of 350 mm to be fitted to the inner door. It fits perfectly into standard door sizes with a thickness of 40 mm (other door thickness are possible according to individual arrangements). We can adjust to the thickness of the door portholes 1-3 / 8 “(34.925 mm) and 1-3 / 4” (44.45 mm). The rings are made of polished stainless steel, while the glass is made according to the order (to choose from frosted, transparent, secure VSG, armored, WC or stained glass). The rings may be powder painted into any color. The offered set includes: – Ring pressed from stainless steel (possibly powder coated to a RAL color) with holes – 2 pieces, – Glass according to order – 1 piece, – A set of nuts and bolts. NUTS: In each bull’s eye there are flange or coupling nuts to choose from. Below some photographs of these nuts: A flange nut a coupling nut Normal 0 21 false false false PL X-NONE X-NONE

Continue reading